Gesamtprogramm Parallelsessions und Posterausstellung

1. Programmübersicht

Hier finden Sie alle Vorträge. Suchen Sie komfortabel nach einzelnen Vortragenden oder Sessions und drucken Sie sich ein entsprechendes PDF-Dokument.
Bitte beachten Sie die unten stehende Tabelle mit allen wissenschaftlichen Postern.

29/03//13:451AExperiments to measure the gas ejection rate of large Li-ion batteries during thermal-runawayDipl.-Ing. Christiane EsslKompetenzzentrum - Das virtuelle Fahrzeug, Forschungsgesellschaft mbH
29/03//14:051ACrash an Crush Testing for xEV Batteries - Comparison of Test Standards and Validation ProceduresDipl.-Ing. (FH) Alexander StadlerTÜV SÜD Battery Testing GmbH
29/03//14:251ABattery safety analysis: a method for simulating the mechanical behavior of Li-Ionen cellsDr. Bernhard BrunnsteinerAVL List GmbH
29/03//14:451AElectric components for battery electric vehicles above 800 VMSc Fabian LuttenbergerAVL List GmbH
29/03//15:051AAdaptive control cooling system for a lithium-ion battery modulePhD Haritz MaciciorIk4 Cidetec
29/03//13:451BFast charging of Li-ion batteries - optimized charging patterns for reduced ageingProf. Oliver BohlenHochschule für angewandte Wissenschaften München
29/03//14:051BProgress in battery development - from the Opel Ampera to the Opel Ampera-eHorst MettlachAdam Opel AG
29/03//14:251BFast Top-up Charging of Lithium-ion Batteries - A comparative ageing studyAbdilbari Shifa MussaKTH Royal Institute of Technology
29/03//14:451BRecent trends in xEV battery pack requirements and associated solutionsDr. Martin JägerFEV GmbH
29/03//15:051BHigh Temperature Water Loss Testing and Gassing Measurement on Automotive Lead-Acid BatteriesJonathan WirthRWTH Aachen
29/03//13:451CNew method using floating currents for fast and high resolved measurement of Arrhenius relation and calendar life aging rateMeinert LewerenzInstitut für Stromrichtertechnik und Elektrische Antriebe
29/03//14:051CAutomated Large Scale Microscopy for Characterisation of Prismatic Li-Ion Cells Using Machine Learning ApproachesAndreas KoppHochschule Aalen
29/03//14:251CThermal gradients in high power and high energy lithium-ion cells analysed by Electrothermal Impedance Spectroscopy (ETIS)Michael DipponKarlsruhe Institut of Technology (KIT) für Angewandte Materialien - Werkstoffe der Elektrotechnik (IAM-WET), KIT
29/03//14:451CMethods coupling experiments and modeling for the determination of interfacial, porous-electrode, and electrolyte propertiesDr. Charles DelacourtLaboratoire de Reactivite et de Chimie des Solides, CNRS UMR 7314
29/03//15:051CA Criterion to Predict Onset of Electric Short Circuit for Lithium-Ion Batteries Subjected to Mechanical LoadsPhD Elham SahraeiMassachusetts Institute of Technology, MIT
George Mason University
29/03//16:252AConnecting of various battery cells for electromobility by using laser micro weldingM.Sc. Johanna HelmFraunhofer-Institut für Lasertechnik ILT
29/03//16:452ASealing Components for Lithium Batteries - Serial Solutions & OutlookDr. Peter KritzerFreudenberg Sealing Technologies
29/03//17:052ADrying of electrodes for lithium ion batteries with soluble and dispersed binderChristiane SchilcherTechnische Universität Braunschweig
29/03//17:252AThe importance of proper electrolyte wetting of lithium-ion cellsChristian PeterFraunhofer-Institut für Keramische Technologien und Systeme IKTS
29/03//16:252BAgeing dependent state of charge estimator for a NMC oxide based lithium-ion batteryDr. Michael HeckFraunhofer-Institut für Solare Energiesystem
29/03//16:452BImpedance-based temperature determination of Li-ion batteries unravelled by microreference electrodes in Li-ion batteriesM.Sc Luc RaijmakersDelft University of Technology
29/03//17:052BDesign of optimized current profiles for fast charging of lithium-ion batteriesMarius BauerZSW Baden-Württemberg
29/03//17:252BPerformance estimation of a cell-to-cell-type active balancing circuit for lithium-ion battery systemsManuel RäberUniversite de Haute Alsace
29/03//17:452BConsidering battery degradation in the hybrid vehicle operation strategy to minimize total cost of ownershipShi LiInstitute for Combustion Engines, RWTH Aachen University
29/03//16:252CChallenges in Stabilizing Si-Alloy Anodes in Lithium-Ion-BatteriesProf. Dr. Egbert FiggemeierHelmholtz-Institut Münster
29/03//16:452CA novel high-energy density Li-ion cell for low-temperature applicationsProf. Filippos FarmakisMicro- and Nanotechnology Laboratory, University of Thrace
29/03//17:052CDetailed Electrochemical and Spectroscopic Study on the Influence of Electrolyte Additives and Alumina Coatings on the Aging of LiNi0.4Mn1.6O4 based CathodesDr. Stefanie OstermeyerVW-VM Forschungsgesellschaft mbH & Co KG
29/03//17:252CComparative study of imide-based lithium salts as electrolyte additives for Li-ion batteriesVarvara SharovaHelmholtz Institute Ulm / Karlsruhe Institute of Technology
29/03//17:452CAqueous processing and additive development for high-voltage lithium-ion cathodesDr. Dominic BresserKarlsruher Institut für Technologie (KIT)
30/03//12:553AProfitability of PV Home Storage Considering Battery Aging and an Electric VehicleThomas KaschubKarlsruher Institut für Technologie (KIT)
30/03//13:153AThe economics of ESS: how to enhance income streams for energy storage in combination with CHP plantsProf. Rico WojanowskiHochschule Darmstadt
30/03//13:353AHome storage systems for FCR provision: Load profiles and battery performanceDr. Annika KufnerCaterva GmbH
30/03//13:553AMinimising battery degradation in realistic stationary applications by integrated economic and electrochemical modellingJorn ReniersUniversity of Oxford
30/03//14:153ASafety and ageing issues in lithium-ion home storage systemsDipl.-Ing. Stephan LuxFraunhofer Institute for Solar Energy Systems (ISE)
30/03//12:553BModeling and simulation of high current scenarios for designing safe lithium-ion cellsAlexander RheinfeldTechnische Universität München
30/03//13:153BGaussian process regression for forecasting battery state of healthRobert RichardsonUniversity of Oxford
30/03//13:353BBattery Core Temperature Prediction, including Parameters Estimation for Lithium-ion Pouch Cell PacksMSc Erik HoedemaekersTNO
30/03//13:553BA non-linear model approach for separation and identification of processes in Lithium-ion batteriesM. Sc. Nicolas WolffTechnische Universität Braunschweig
30/03//14:153BDevelopment and validation of electric vehicle battery equivalent model, SoC, SoF and SoH estimation algorithmsDr. Mikel OyarbideFUNDACION CIDETEC
30/03//12:553CCarbon-coated core-shell Li2S@C nanocomposites as high performance cathode material for Lithium-Sulfur batteriesChunguang ChenForschungszentrum Juelich
30/03//13:153CComparative study of electrolyte additives for lithium metal in lithium-sulfur batteriesDr. Marian Cristian StanMEET Batterieforschungszentrum / Westfaelische-Wilhelms Universitaet Münster
30/03//13:353CImproving performance of Li-S cells under cycling, a model-informed approachDr. Monica MarinescuImperial College London
30/03//13:553CEffect of Cobalt metal complex on the chargeability of Lithium-Oxygen batteryDr. Fanny BardéToyota Motor Europe
30/03//14:153CSodium-Ion batteries - One step forward for the environment?Dr. Jens PetersKarlsruhe Institut für Technologie (KIT)
30/03//15:204ANew approach for a comprehensive criticality evaluation of battery raw materials in the automotive industryLucas Philipp WeimerRWTH Aachen University
30/03//15:404AInfluence of Battery Storages on the Market Price for Primary Control ReserveAndreas MaazRWTH Aachen University
30/03//16:004ABattery Electric Vehicles: Price Premium and Future TrendsProf. Dr. Momo SafariHasselt University
30/03//16:204AEcologically Friendly Recycling of Lithium-Ion Batteries from Electric VehiclesJan DiekmannTechnische Universität Braunschweig
30/03//16:404ASecuring material supply for the lithium ion battery value chainMSc, MBA Berend LooisHiTech Materials Advisory
30/03//15:204BpAgeing: Ageing of Lithium-Ion Batteries in parallel ConnectionMarkus HofmannTechnische Universität München
30/03//15:404BEffect of load cycle on the lifetime evolution of a lithium ion batteryMarian Patrik FelderTU Dortmund University
30/03//16:004BUnderstanding inhomogeneities in battery performance. The effect of thermal gradients on lithium iron phosphate and lithium sulfur batteries.Dr. Gregory OfferImperial College London
30/03//16:204BSimulation-based degradation analysis of PHEV lithium-ion batteries using a time-upscaling methodProf. Dr. habil. Wolfgang G. BesslerOffenburg University of Applied Sciences
30/03//16:404BFull cell parametrization of a high-power lithium-ion battery for a physico-chemical modelJohannes SchmalstiegRWTH Aachen University
30/03//15:204CSqueezing energy: The thrill of industrial battery developmentDr. Armin ModlingerLitarion GmbH
30/03//15:404CTowards solid state batteries: Materials and cell technologyProf. Dr. An HardyHasselt University and imec - partner in energyville division imomec
30/03//16:004CPost-Mortem Analysis of aged commercial Li-ion Cells - Disassembly, Analysis Methods, and Selected Examples from the LabDr. rer. nat. Thomas WaldmannZentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)
30/03//16:204CLithium gradients in graphite electrodes of aged lithium-ion batteries studied by colorimetry, XRD and coulombic efficiency measurementsJörn WilhelmTechnische Universität München
30/03//16:404COn the Influence of High Operational Voltages on the Electrochemical Performance and Degradation of Lithium-Ion Batteries with Nickel-rich Mixed Layered Oxide-CathodesM.Sc. Christian WeisenbergerHochschule Aalen - Institut für Materialforschung Aalen

2. Posterausstellung

P1-01Novel nitrile-based liquid electrolytes for safer lithium ion batteriesChristian KrauseMEET - Münster Electrochemical Energy Technology, WWU Münster
P1-02Solid electrolyte interface as buffer and cage for fast charging of 6'' processed Si microwire anodesM.Sc. Sandra HansenKiel University
P1-03Lithium plating simulations in commercial Lithium-ion batteries during low-temperature chargingMaria Angeles Cabanero MartínezFraunhofer ISC
P1-04New Insights into Pre-Lithiation Kinetics of Graphite via Nuclear Magnetic Resonance SpectroscopyFlorian HoltstiegeMEET - Münster Electrochemical Energy Technology
P1-05Systematic study of mixtures of ionic liquids, organic carbonates and conducting salts as electrolytes for lithium-ion cellsDr. Andreas HofmannKarlsruher Institut für Technologie
P1-06Tin Nanoparticles as Anode Material for Lithium Ion BatteriesAnke DüttmannUniversität Oldenburg
P1-07Metal-organic frameworks for rechargeable batteriesDr. Simon DühnenMEET - Münster Electrochemical Energy Technology
P1-08Characterization of microstructural degradation effects in commercial graphite/NMC cells by computer tomography and scanning electron microscopyDr. Ute Golla-SchindlerHochschule Aalen
P1-09Advanced Electrolyte Formulations for High Voltage Lithium-Ion BatteriesRalf WagnerUniversity of Münster
P1-10Comparative Evaluation Study of Electrochemical Performance of Several Cathode Materials for Lithium Ion BatteriesDina BeckerUniversity of Münster, MEET Battery Research Center
P1-11Optimizing the lithium ion battery high voltage cathode material LiNi0.5Mn1.5O4 synthesized using different precursor chemistries and calcination parametersMatthias SeidelFraunhofer ITKS
P1-12Carbon-Silicon Composite Anodes for Next Generation Lithium Ion BatteriesDr. Christian SchreinerSGL Carbon GmbH
P1-13Active surface area measurements of electrodes for lithium-ion batteriesJan Bernd HabedankTechnische Universität München
P1-14Study of the Solid Electrolyte Interphase on silicon model electrodesRoman NölleMEET Battery Research Center
P1-16Electrochemical similarities and differences of LPCVD deposited Silicon compared to Silicon Nanoparticles in Lithium Ion BatteriesM. Sc. Kathleen NimmrichFritz-Haber-Institut der Max-Planck-Gesellschaft
P1-17Multi-functional Intelligent Battery CellsDr. Wilhelm MaurerInfineon Technologies AG
P1-18Physico-chemical properties and optimization of lithium bis(fluorosulfonyl)imide (LiFSI)-based carbonate electrolyte solutionsDipl.-Ing. Johannes NeuhausUniversity of Kaiserslautern
P1-19Epoxy-based binders for lithium-ion batteries manufactured from renewable materialsMaja KandulaTechnische Universität Braunschweig
P1-20Electrochemical Investigation of Compositional Effects in Silicon-Composite MaterialsChristopher HeimDeutsches Zentrum für Luft- und Raumfahrt
P1-21Cyclotriphosphazenes as bifunctional additives for lithium ion battery electrolytesIvan GlogovacMEET - Münster Electrochemical Energy Technology
P1-22Investigation of new additives for nickel-rich cathode materials to improve the cycling stability in lithium on batteries.Sven KleinMEET Batterieforschungszentrum
P1-23The real impact of LiPF6/organic carbonate-based electrolyte oxidation at elevated electrode potentialsJohannes KasnatscheewUniversity of Münster
P1-24Lifetime Analysis of Lithium-Ion Batteries by OCV-curve Measurements and Impedance SpectroscopyMichael WeissKarlsruhe Institute of Technology (KIT)
P1-26Hydrogenated Amorphous Silicon Nanoparticles as Anode Material for Lithium-Ion BatteriesAndrew Paolo Cádiz BediniIEK-5: Photovoltaics / Forchungszentrum Jülich GmbH
P1-27Carbonate-based gel polymers: Investigation of electrochemical and thermal properties for use as future safe electrolytes in lithium ion batteriesAnna GerlitzHelmholtz Institute Münster
P1-28Morphology changes of a Li-rich-NMC battery cathode material due to calendering and agingM.Sc. Daria ZeibigAalen University
P1-29Influence of the design of high-energy-density graphite negative electrodes on the electrochemical performanceSimon MalifargeLaboratoire de réactivité et chimie des solides
P1-30Influence of Aging on the Thermal Stability of Layered and Spinel-Type Cathode MaterialsMarkus BörnerMEET Battery Research Center, University of Münster
P1-31Roll-to-Roll Deposition of Columnar Silicon Layers on Copper Foil As Thin Film AnodesSteffen StraachFraunhofer-Institut für Organische Elektronik, Elektronenstrahl- und Plasmatechnik (FEP)
P1-32Anionic redox in Li-rich layered oxide cathodes: from fundamentals to applications by comparing 'model' vs. practical materialsGaurav AssatCollege de France
P1-34Aqueous electrode formulation at MEET - Recipe development and transfer to the pilot plant scaleTobias GallaschWestfälische Wilhlems-Universtiät Münster, MEET Battery Research Center
P1-35Electrode resolved EIS characterization of commercial lithium-ion batteries by means of the method of the 'distribution of relaxation times' (DRT)Dr. Tom Patrick HeinsTechnische Universität Braunschweig
P1-36Ball-milled Silicon - particle size impact on degradation of Si-C AnodesChristine NowakTU Braunschweig, Institut für Partikeltechnik
P1-37Systematic study of tin-based intermetallics as novel anode materials for lithium ion batteriesOlga JoosUniversity of Münster, MEET Battery Research Center
P1-38Determination of heat capacities of cathode materials and calorimetry on coin cells with a DSC-like Battery Calorimeter for Lithium-Ion BatteriesDr. David HenriquesHochschule Mannheim
P1-39Non-Stoichiometric Amorphous Silicon Nitride as Anode Material for Li-Ion BatteriesMartin KirkengenInstitute for Energy Technology (IFE) & University of Oslo
P1-40Silicon Deposited by Low Pressure Chemical Vapour Deposition on Carbonaceous Materials for Lithium Ion BatteriesM. Sc. Kathleen NimmrichFritz-Haber-Institut der Max-Planck-Gesellschaft
P1-42Fast and reliable parameter estimation method for a physic-chemical modelIzaro LaresgoitiIk4-CIDETEC
P1-43Development of operational strategies for lithium ion batteries to guarantee a safe and lifetime optimized performanceDr. Andreas DreizlerDeutsches Zentrum für Luft- und Raumfahrt e. V. (DLR)
P1-44An 'Industrie 4.0' approach for the accelerated development of new molecular materials for improved electrochemical energy storage devicesProf. Dr. Martin KorthUlm University
P1-45Using FIB-SEM images to determine the structure of Graphite Anodes and NMC CathodesFabian FrieInstitut für Stromrichtertechnik und Elektrische Antriebe (ISEA)
P2-01Nickel/sulfur composite electroplated nickel foams for the use as 3D cathode in lithium/sulfur batteries - a proof of conceptDr. Seniz SörgelResearch Institute for Precious Metals and Metals Chemistry (fem)
P2-03Correlation of supercap electrode surface parameters and electrical performanceJulian MarscheiderTU Berlin
P2-04Highly Stable Carbon-Free Cathodes for Li-Air Batteries with Aqueous Alkaline Electrolyte: Electrochemical and Structural InvestigationsDr. Dennis WittmaierDeutsches Zentrum für Luft- und Raumfahrt
P2-05The Role of Anions in Lithium- Oxygen Battery ElectrolytesMSc. Eng Merve ILIKSURWTH Aachen University
P2-06FastStorageBW - Development of a high power hybrid energy storage cellPeter KitzlerFraunhofer Institut für Produktionstechnik und Automatisierung (IPA)
P2-07TiO2/graphene Nanocomposites as High-Performance Anode Materials for Sodium-Ion BatteriesDr. Lisong XiaoInstitute for Combustion and Gas Dynamics – Reactive Fluids (IVG), University of Duisburg-Essen
P2-08Advanced anodes for high energy density lithium ion and lithium sulfur batteriesMarkus PiwkoFraunhofer Institut für Werkstoff- und Strahltechnik IWS Dresden
P2-09Nickel/sulfur composite electroplated cathodes for the use in lithium/sulfur cellsProf. Dr. Timo SörgelAalen University
P2-10Improving the electrochemical performance of lithium-metal systems by lithium surface modificationJens BeckingMEET Battery research center
P2-11Trifluoroalkyl substituted N-heterocyclic lithium salts: An investigative study of property-structure relationshipsDipl.-Chem. Mariano GrünebaumForschungszentrum Jülich GmbH
P2-12Comparison of Lithium and Magnesium Polysulfides in Different SolventsDr. Kirsi Jalkanen MEET - Battery research center, University of Muenster
P2-14Preserve higher capacities by adjusted manufacturing processes for lithium-sulfur cathodesPaul TitscherTU Braunschweig
P2-16Two-dimensional multiphysics simulation of Li-air button cells for electrolyte choice and electrode designDr. Manik MayurOffenburg University of Applied Sciences
P2-19Ionic liquid/water mixtures as a potential path towards secondary zinc/air batteriesMartin BayerUniversität Münster
P2-20Scandium-Substituted Na3Zr2(SiO4)2(PO4) as Superior Sodium-Ion ConductorsDr. Frank TietzForschungszentrum Jülich GmbH
P2-21Production and characterization of bi-functional cathodes for secondary zinc-air batteriesAlexander KubeGerman Aerospace Center
P2-22Parameter identification for a physic-chemical battery model via electrochemical impedance spectroscopyChristiane RaheISEA RWTH Aachen
P3-01In situ equipment condition monitoring of lithium-ion-cells by novel fiber optic sensor systemsAlexander GräfensteinFraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM
P3-02State of charge estimation of lithium sulphur batteries using a combination of current integration and in-situ impedance spectroscopyErik BerendesFraunhofer-Institute for Transportation and Infrastructure Systems IVI
P3-03Investigation Influnce of Phase Change Material on Reaction of Lithium-Ion Cells to Abusive ConditionsHartmut PoppAIT Austrian Institute of Technology
P3-04A Novel Test Circuit for Investigating the Influence of Fast Switching Currents on Lithium-Ion-Battery AgeingPablo Korth Pereira FerrazTechnische Universität Berlin
P3-05A High Frequency Model for Investigating the Influence of Fast Switching Currents on Lithium-Ion-Battery AgeingPablo Korth Pereira FerrazTechnische Universität Berlin
P3-06Comparison of frequency and time domain modelling of lithium ion batteries using fractional calculusMarcel FrankeTechnische Universität Berlin
P3-07Sustainability Assessment of Second Life Application of Automotive Batteries (SASLAB): Preliminary results on ageing of Li-ion cells in automotive applications and power grid supportAndreas PodiasEuropean Commission
P3-08Investigation of the Applicability of Batteries for Aeronautical Applications - A Quantitative Reliability ApproachPhilipp BergTechnical University of Munich
P3-09Interdependencies of cell chemistry, SOC and temperature on the electrochemical impedance spectroscopyProf. Robin VanhaelstOstfalia, Hochschule für angewandte Wissenschaften, Campus Wolfsburg
P3-11Definition and Design of the Mechanical Constraints of a Contact System for Automotive Traction BatteriesMarcus KurrleBertrandt Technologie Gmbh
P3-12Simulation-assisted design of thermal management of Automotive Li-ion cells based on highly detailed geometry variationsDominic J. BeckerKarlsruhe Institute of Technology (KIT)
P3-13Analysis of the calendar degradation of commercial high power NCA Li-ion pouch cellsSabine PaarmannKarlsruhe Institute of Technology (KIT)
P3-14Simulation of the multi-physical transport processes in characteristic anode structures of Li-ion cellsPhilipp SeegertKarlsruhe Institute of Technology (KIT)
P3-15Thermal Runaway of Lithium-Ion Cells - Comparison of Experiments and SimulationsDr. Carlos ZiebertKarlsruhe Institute of Technology
P3-16Li-Ion Battery Cell Thickness Change Hysteresis and Link to Aging BehaviorLukas GoldFraunhofer Institute for Silicate Research ISC
P3-17Influence of different phase change materials on thermal aging of lithium-ion cellsDipl.-Ing. Dr. Gerwin Drexler-SchmidAustrian Institute of Technology
P3-19Battery lifetime prediction for different technologies based on stress characterization and aging experimentsMaik NaumannTechnische Universität München
P3-20Cell-to-cell active balancing battery management system for 2nd life applicationsManuel RäberZHAW
P3-21Validation of Battery Management Systems using Hardware-in-the-Loop Methods and Real-Time Battery Models.Hendrik ZappenInstitut für Stromrichtertechnik und Elektrische Antriebe, RWTH Aachen
P3-22Impedance spectroscopy from electrode to cell level: A model-based reconstruction methodology to assign electrical and electrochemical loss processes in commercial lithium-ion cellsStefan SchindlerHelmholtz-Institut Ulm
P3-23Parametrization within a Thermal Simulation of Li-Ion Batteries Utilizing Mission ProfilesM.Sc. Ziyi WuFH Aachen / RWTH Aachen
P3-24Advanced over-current protection with triggered fusesMitja KoprivšekETI Elektroelement d.d.
P3-25Understanding Ageing Mechanisms in Li-ion Batteries using Entropy Spectroscopy and Incremental Capacity AnalysisDr. ing. Preben J. S. VieInstitute for Energy Technology
P3-26Modelling the impact of cell internal parameters on cell-to-cell variations of commercial LiFePO4-graphite cellsKatharina RumpfTechnical University of Munich (TUM)
P3-28Benchmark of Battery Storage Topologies in Cost, Efficiency and SafetyMarco SteinhardtTechnische Universität München
P3-29An in-depth view into the Tesla Model S module Part one: Single cell testing and modellingDipl.-Wirt.-Ing. Friedrich Emanuel HustRWTH-Aachen
P3-30Semi-Empirical Thermal FEM-Modeling of Cylindrical Li-ion Batteries and the Effect of FEM-GeometryM.Sc. Elisabeth Irene KolpTechnical University of Munich
P3-31Non-destructive detection of local aging within lithium-ion pouch cells by applying multi-directional laser scanningM.Sc. Johannes SturmTechnical University of Munich (TUM)
P3-32Test Performance of the High Temperature NaNiCl2 Batteries for the Tilos Island Smart Microgrid ApplicationTony DelaplagneFrench Alternative Energies and Atomic Energy Commission
P3-34New method for the characterization of high-frequency battery impedancesPeter KeilTechnical University of Munich (TUM)
P3-35Identifying Aging Reactions in Lithium-Ion Batteries by Coulomb TrackingPeter KeilTechnical University of Munich (TUM)
P3-36An in-depth view into the Tesla Model S module Part two: Module characterization and comparison to other state of the art EV battery systemsMatthias KuipersHelmholtz-Institut Münster, Forschungszentrum Jülich GmbH
P3-37Robust Parameter Estimation of multiple cells in series connectionThomas LehmannFraunhofer IVI
P3-38Battery and Fuel Cell TestingMiroslaw MarczykFuelCon AG
P3-39Aging of Battery Systems -- Influence of InhomogeneitiesSusanne LehnerISEA-RWTH Aachen
P4-01Mineral fillers for a better thermal management of the batteries of tomorrowDipl. - Ing. Helge MohrQuarzwerke GmbH
P4-03EV as a grid element and its batteryallowing cheaply to overcome heavy proplems of urban trafficDavid Judbarovskiretired engineer
P4-04Vibration Analysis of an SLI Battery using FEM SimulationDr.-Ing. Ornwasa TraisigkhacholJohnson Controls Autobatterien GmbH
P4-05System Simulation of Electric Hybrid Heavy-Duty Trucks powered from Catenary, Battery and DieselM.Sc. Ivan MareevInstitut für Stromrichtertechnik und Elektrische Antriebe (ISEA), RWTH Aachen
P4-06Advanced Lead batteries: still in the running for 48 Volt mild-hybrids and energy storage applications?Dr. Boris MonahovALABC
P4-07Challenges of integration of the large format battery technology EMBATT in future automotive platformsSebastian RückertIAV GmbH
P4-10Model Reduction of a Physico-Chemical Porous Electrode Model for Realtime ApplicationsHeiko WitzenhausenRWTH Aachen - ISEA
P4-11Introduction of Battery-Electric Buses in European CitiesFabian MeishnerRWTH Aachen - Institut für Stromrichtertechnik und Elektrische Antriebe
P4-14Development of a consistent methodology to support the early stages of electric vehicle development considering physical and manufacturing characteristics of different Li-Ion battery cell variantsM.Sc. Roland UerlichTU Braunschweig
P4-15Advanced Battery Thermal Management for Increased Energy Efficiency of Electric Vehicles - Results from the EU-Funded Project 'OPTEMUS'Dipl.-Ing. Gero MimbergInstitut für Kraftfahrzeuge, RWTH Aachen University
P4-16A High-Power Battery Pack with LTO Cells and integrated SiC DC/DC-Converter as Boost Unit in Electric VehiclesThomas NemethRWTH Aachen University
P4-173D all-solid state thin-film batteries : towards ultra-fast chargingPhD Reza FathiTNO-Holst center
P5-02Electric vehicle battery life time reduction through vehicle to grid service?Dipl.-Ing. Thomas RumpUniversity of Rostock
P5-03Comparative assessment of batteries in hybrid power-to-gas systemsDr. Peter StenzelForschungszentrum Jülich GmbH
P5-04Influence of Selected Criteria on Performance of Household Li-Ion Battery Storage SystemsBernhard SchwarzKarlsruher Institut für Technologie (KIT)
P5-05Optimal operation of a lithium-ion battery in a grid-connected PV battery system to reduce peak PV feed-in and peak load demandDeepranjan DongolOffenburg University of Applied Sciences, Offenburg, Germany
P5-06Low-cost modular PV-battery microgrid emulator for testing of energy management algorithmsDr. Leong Kit GanUniversity of Oxford
P5-08Efficiency and simulation model for PV battery storage systemsDominic HinkZHAW Winterthur
P5-09Standardization of battery storage systemsDr. Kerstin SannVDE e.V.
P5-10Size reduction of battery energy storage systems for PV plants power ramp rate controlAitor MakibarPolytechnic University of Madrid UPM
P5-11PV Plants ramp rate control algorithm for reduced size Li-Ion batteryAitor Makibar PuentePolytechnic University of Madrid UPM
P5-12Power Analysis of an Iron Concentration Flow BatteryBjörn KleinsteinbergNTNU Trondheim
P5-13Industrial storage System as Off-Grid Solution/Storage PV with Simultaneous Delivery of Ancillary Services in German GridHerr Sebastian WagnerDigital Energy Solutions GmbH & Co. KG
P5-14VirtualBattery - Benchmark of PV battery invertersDominik SchleddeFraunhofer-institut für Winenergie und Energiesystemtechnik (IWES)
P6-01Optimization of the requirements management for the development and certification of lithium-ion battery systemsSaskia WesselRWTH Aachen University
P6-03Gripping-tool for lithium-ion battery cells with integrated testing functionalityNemanja SarovicRWTH Aachen
P6-04Contacting of cylindrical lithium-ion cells using pulsed laser radiationPatrick SchmitzTechnische Universität München
P6-05Laser cutting: Impact of active material particles and metal spatter on cycle stabilitySven HartwigInstitut für Füge- und Schweißtechnik, TU Braunschweig
P6-06Intermittent Slot Die Coating for Lithium-Ion-Battery-ApplicationsRalf DiehmKarlsruher Institut für Technologie (KIT)
P6-07Laser vibrometry as a measuring method to investigate the machine behaviour during calenderingTill GüntherTechnische Universität München
P6-08Process Charactization of Calendering Electrodes for Lithium Ion BatteriesChris MeyerTU Braunschweig
P6-09Investigation of the evolution of the electrode's mechanical properties during the electrode manufacturingM. Eng. Nicolas Billotiwb - Institut für Werkzeugmaschinen und Betriebswissenschaften
P6-10Determining the influence of LFP particle morphologies on the electrochemical performance of water and NMP based cathodesDr. Sebastian JankowskyHochschule für Angewandte Wissenschaften Landshut
P6-11Particle reduced Laser CuttingDr. Heinz KieburgLaser-Mikrotechnologie Dr. Kieburg GmbH
P6-12Challenges and new approaches of high quality cell stackingSebastian HaagKIT Karlsruher Institut für Technologie
P6-13All-solid-state batteries - paving the road to large-scale productionJoscha SchnellTechnical University of Munich
P6-14Remanufacturing assessment of battery packs for deduction of design guidelinesChristoph LienemannPEM der RWTH Aachen University
P6-17Conceptual Design of a System for Data-Supported Automated Evaluation of Electrochemical Test Cells for Development of New Material SystemsDipl.-Ing. Kai BockwinkelTU Braunschweig - Institut für Werkzeugmaschinen und Fertigungstechnik
P6-18Data acquisition and data tracing for data mining in lithium-ion battery cell productionArtem TuretskyyInstitut für Werkzeugmaschinen und Fertigungtechnik, Technische Universität Braunschweig
P6-19Statistical Investigation of Stacking Errors in Battery Assembly Using Monte Carlo SimulationRuben LeithoffInstitute of Maschine Tools and Production Technology, TU Braunschweig
P6-20Results database for battery cell production within the "ProZell" ClusterM. Sc. Nicolas BognarTU Braunschweig
P6-21Investigation of the Electrolyte distribution in Lithium-Ion Batteries by X-Ray RadiographyAntje SchillingTU Braunschweig - Institut für Werkzeugmaschinen und Fertigungstechnik
P7-01Innovation promoters in technology transfer and insights from 'Technology transfer between science and industry'Oliver KrätzigForschungszentrum Jülich GmbH, Helmholtz-Institut Münster (IEK-12)
P7-02Scenarios for battery and component costsAnsgar vom HemdtRWTH Aachen